SLAM® Hornet 1LED 12V

SLAM Hornet 1LED light for 12V electricity
SLAM Hornet 1LED 12V Ex-area work lamp in use.
SLAM Hornet EX-lamp with Protective film and end-cap protectors.
SLAM Hornet 1LED work lights with ATEX certification
Hazardous Ex Zone1 marked with sing.
Hazardous area light set-up with SLAM Hornet.

Technical data

Code: SH1LEDA12
Certification: Ex II 2 G Ex eb mb op is IIC T4 Gb
Ex II 2 D Ex tb op is IIIC T90°C Db
Ingress protection: IP66
Operating temperature: -20 °C to +40 °C
Supply voltage: 9-15VAC/DC
Dimensions: 580 x 115 mm
Weight: 1.72 kg
Variables: A-cable in
Atexor specialises in lighting for explosion hazardous ATEX zones.

SLAM® Hornet 1LED 12V

A tough Ex luminaire low on weight and extra low on voltage

  • ATEX certified for zones 1 & 21, T4
  • 180⁰ illumination with CRI 85+
  • SafeEye® LED technology inside
  • Optical irradiance considered

On many jobs, particularly in confined spaces, risk of electrocution presents a challenge. Low voltage equipment is a must, but sometimes, dropping to 48 or even 24 Volts is just not enough. You need to go with the lowest voltage possible.

When very low voltage is on the menu, whether prescribed by local regulations or a company’s own requirements, the SLAM® Hornet 1LED 12V is a rough-and-ready work light ready to deliver. Each unit provides excellent 180° lighting with a CRI of over 85 for excellent color recognition and SafeEye® for eye protection. Visit our Knowledge Base for more information about CRI.

Built from the same robust, dissipative materials as the industry-proven SLAM® Hornet line-up, the Hornet 12V takes it a step further with electrical safety, supporting input power as low as 9 Volts. All new electronics not only mean you can use input power from 9 to 15 Volts, but they also give you the security of under and over-voltage protection.

In addition, the internal construction updates make our well-known easy work light maintenance even easier. SLAM® Hornets enjoy the highest level of serviceability in the market. The Hornet 1LED 12V takes it another step further!

Check out our SLAM® TrafoEX step-down transformers for Ex certified power supply solutions. Combine our transformers with Hornet 1LED 12V work lights for a complete, portable low-voltage lighting solution ideal for Potential Explosive Atmospheres in applications like tank inspections, oil tank cleaning and all kinds of confined spaces.


You get the benefits of our full range of accessories with the Hornet 1LED 12V. In addition to protective, anti-static films, you can select from the widest fitting range on the market for portable lighting – brackets, hooks and straps. All fittings are dissipative and certified for use in Explosion Hazardous Areas.


ATEX Zone 0 Zone 1